+ 33 (0)4 93 06 09 12 | [email protected]

For the yachting professional on the Mediterranean

Superyacht Refit

Article by ONBOARD Magazine

There is not one square inch on board the yacht that will at some stage not require refit or a repair. Here we look at the wide range of products, services and companies here to help

STABLE

STABLE TABLE
Stable’s exceptional technology allows local spot stabilising onboard, neutralising roll and pitch movements and sideway forces. From the world’s first stabilised billiard table delivered in 2002, STABLE have delivered numerous billiards and pool tables for the yacht segment. Integration with suppliers of bespoke beds and handmade mattresses also make this technology possible for all beds on board to deliver complete comfort to the owners and guest.
For more details Tel: +47 907 47 153 or visit www.stableonboard.com

TEIGNBRIDGE PROPELLERS
As a world leading designer of propellers and shaftlines for 45 years, the high performance C’Foil propeller provides unrivalled performance. Globally, few companies genuinely possess the design and manufacturing capabilities to produce high quality custom propellers, but Teignbridge is one of those companies. They design and manufacture propellers, shafts, sterntubes, shaft seals, bearings, rudders, rudder tubes, tie¬bars, glass¬in P’Brackets, platform P’brackets and ‘A’brackets. Delivering across the world for motor yachts, superyachts, tugs, supply vessels, passenger ferries, small ships, crew boats, fast patrol boats, rescue boats and submarines.
For more details Tel: +44 (0)1626 333377 or visit www.teignbridge.co.uk

Teignbridge Propellers

TEAKDECKING SYSTEMS
Mind the Gap! No, not the London Underground, but the 3 to 10mm caulk-filled gap between teak planks. These narrow seams are critical expansion and contraction joints that must move and flex with the vessel while keeping the deck watertight. Caulking adheres to teak plank sidewalls and remains elastic. It must be temperature-resistant for all weather conditions and resistant to chemicals and UV degradation. After sanding, caulking must maintain a first-class appearance. Teakdecking Systems SIS 440 Teak Deck Caulking is industry-leading with a proprietary formulation, installed globally on more than 50,000 decks. Proper seam preparation, application techniques, and procedures are available in a 16-page guide: www.teakdecking. com/caulk/
For more details Tel: +1 (941) 756 0600
or visit www.teakdecking.com

teakdecking
Pure Superyacht Refit

PURE SUPERYACHT REFIT
Planning a significant refit in STP Palma? Don’t trust your luck to randomly picking possibly unqualified or substandard sub-contractors from the list of hundreds. Pure Superyacht Refit has been in business since STP was formed and has extensive knowledge and understanding of the companies operating in the Palma Superyacht sector and has project managed some of the most challenging and notable refits over the past 12 years. Pure is probably the most “hands-on” project management company in STP and possibly the Mediterranean. With a conveniently located office onsite, Pure offers a fully

tailor-made solution for your refit requirements and project needs. Pure’s philosophy is that successful Project Management is conducted where the work is being carried out, in real-time… onboard the vessel, up and down the scaffolding and in the workshops around Palma. Pure is lead by Nic Clarke, a former professional yacht racing boat captain of 20 years, a qualified mechanical and electrical engineer.
For more details Tel: +34 627813580 or visit www.pureyacht.com

Fastmount

FASTMOUNT
Fastmount has long understood that panel installation should be simple – so they’ve taken a popular clip and made it even easier to install. Introducing the PC-SVMX from the Standard Range – featuring all of the shear strength and pull-out load of the PC-VMX, removing the self-tapping base in favour of three screw holes, for rapid installation without the use of special tools. The new PC-SVMX has a 15kg pull-out load, 100kg shear strength and is available now worldwide to simplify your next interior refit. Distributed in France by DOMARINE. PC-SVMX makes heavy-duty strength effortless.
For more details Tel: +33 (0)6 72 80 81 85 or visit www.domarine.fr and www.fastmount.com

YAS PROTEC
The YAS teamwork with you to give you the right temporary protection products for all surfaces on board the yacht during building or refit. Every yard is unique, very yacht is special and every surface is different. But all the YAS products have the same purpose – to prevent damage to expensive finishes while you are working on a yacht. The goal is to ease the level of involvement on board by managers, shipyards, representatives, crew members and subcontractors. The products protect decks, floors, carpets, doors, windows, stairs, corners, edges, and handrails. In short, every yacht surface, including custom-made and no matter what size. YAS PROTEC

YAS Protec

is the world’s largest specialist in temporary protection. The team are experts in the marine industry and have a full understanding of the challenges you face in the yard.
For more details Tel: +33 (0)6 60 69 56 50 or visit www.yas-protec.com

Girschner Marine

Girschner Marine
For over 25 years Girschner Marine has been involved in the innovation, design and installation of HVAC and Refrigeration systems for the superyacht industry. With a team of highly skilled engineers, Girschner also provide vital monitoring and servicing for existing systems on board around the world. Just like any other system, it is essential for these HVAC+R systems to run efficiently, consistently and be adaptable for a changing environment and particularly for a change of usage when entering a heavy charter season. The team has also developed market leading rack cooling units, bespoke and designed to 

deliver optimal performance independent of ambient temperatures. Within any refit visit you should certainly be upgrading these systems for optimal performance.
For more details Tel: +49 4221 9837 or visit  www.girschner-marine.com

Hem Water

HEM
HEM (Hydro Electrique Marine) with its head office in Antibes, France, is Europe’s leading brand for fresh water generation systems and services for superyachts. The company is owned by Evac Group, the world’s premier provider of integrated water and waste management systems and corrosion protection systems. HEM have been serving the superyacht market for 40 years earning a strong reputation for high service standards and dedication to the needs of the customers. HEM can offer complete cleantech solutions including advanced wastewater treatment systems, all designed to provide numerous environmental benefits for superyachts.
For more details Tel: +33 (0)4 93 74 29 29 or visit www.hemwater.com

KM YACHT BUILDERS
KM Yachtbuilders is a full-service shipyard providing new build, refit, repair and maintenance for yachts up to 40m. The yard’s 20+ years of experience enable it to advise you well, allowing you to make well-educated decisions about your new build or refit project. KMY is one of the few yards left that have all disciplines in-house; aluminium construction, carpentry, electrical, mechanical divisions, painting and rigging and launch can all be done at one location in Makkum. Through developing and retaining competencies in-house, the yard is able to reach the highest quality standards as well as manage large refit projects. With a single contact point backed up by an

KM Yacht Builders

experienced team of 50+ professionals, attention is given to not only the quality of the work, but also the experience throughout. With a fleet of yachts operating in demanding sea areas, including the arctic, the yard understands about build quality and reliability. The utmost care and attention is given to every element of any refit, no matter how small or large. The team is dedicated and proud of the quality and reliability of every project it undertakes. Dutch craftsmanship at its very best – you would expect nothing less. For more details Tel: + 31 (0)515 233 000 or visit www.kmy.nl

Carpentry And Boat Building Services

C.A.B.B.S
Carpentry and Boat Building Services was established in 2007 and is widely known as a company that provides quality workmanship above all else. The highly skilled team is willing and able to complete whatever job is required, be it a full interior refit or alteration, a new teak deck or repairs, bespoke exterior furniture, or perhaps Perspex or Corian work. All completed with an end result that you will be proud of. With an emphasis on quality and customer service C.A.B.B.S is the logical choice. For an honest reliable service based in the hub of Mediterranean yachting call C.A.B.B.S.
For more details Tel: +34 971 074 965 or visit www.cabbs.es

Atlas Carbon

ATLAS CARBON PRODUCTS
For over 20 years Atlas Carbon Products have been at the forefront of designing and producing the finest lifting solutions for the marine industry. Uniquely elegant, the Atlas davits are the first choice for superyachts and the company is known and respected throughout the industry for the quality of their products and excellent customer service. Atlas davits are highly customisable so contact the friendly team to talk about your lifting requirements. You will not be disappointed with the products or service.
For more details Tel: +44 (0)1590 646 780 or visit www.atlascarbonproducts.com

MCK SUPPLIERS
MCK is a Dutch company with an experienced and ambitious team of experts, that know their way around refit, new build and operational yachts very well. They offer a full and flexible range of products. Ranging from engineering, galley, interior, sport and toys to uniforms, deck and customised projects. This company is known for its open and transparent communication combined with their fair pricing, and unequalled level of expertise. You can expect nothing but the best from this Dutch supply company. After placing an order, everything is just one click away through customer login. An exceptional nautical supply for the superyacht industry. Interested?
For more details Tel: +31 (0)85 0220638
or visit
www.mck-suppliers.com

MCK Suppliers
BM Composites

BMCOMPOSITES
BMComposites are leading experts in the design, build and installation of composite structures for the superyacht market. Their management teams provide an end-to-end service for refit projects and new builds. Based in STP Palma, BMC also have a state¬of-the-art manufacturing facility minutes from the port. Experts in flybridge design and manufacture using the latest 3D technology, BMComposites are currently building an extensive new Sky Lounge (see photo of the 3D render) and starting a major new project in La Ciotat, France. Authorised distributor of GURIT composite materials for the Balearics, Spain and Portugal.
For more details Tel: +34 971 254 181
or visit www.bmcomposites.com

TECHNOSHIP
Technoship has been a supplier for the yachtbuilding industry since 1969. They offer a full and flexible range of products and services, ranging from consultancy and design to installation, maintenance and repair. They represent: Steen GmbH & Co., the world’s leading manufacturers of custom designed deck machinery, such as anchor capstans, anchor winches, mooring bollards, mooring capstans, towing winches, non-magnetic winches and cranes. Technoship offer complete design solutions for any type of yacht. Ultra Fog AB, the most effective and efficient high-pressure watermist fire-fighting system on the market. Tested and approved for accommodation, stores and service areas, as well as machinery spaces, local protection, RoRo and special category spaces, balconies, galley cooking and fat fryer systems. Systems include operator panels to monitor and operate the safety systems.
For more details Tel: +31 55 355 5876
or visit www.technoship.nl

Technoship

ASA BOOT ELECTRO
ASA Boot Electro is a wholesaler of technical products, materials and systems for the yacht building industry. The company focuses on advice, sales and support for electrical and hydraulic systems such as Vimar switch materials & By-me domotica systems, Victron Energy Chargers / Inverters, Side-Power hydraulic & AC Thrusters up to 1400KGF. Together with Side-Power Vector fin stabilisers. ASA are importers and official distributors for well known brands such as Alfatronix, Aqualuma, Aqua Signal, BCM, Berker, Blue Sea, Cabin, Candy, Cobra, Cole Hersee, C-Map, C-Warm, Cormar, Exide, Gianneschi, Hubbell, Lenco, Marco, Mast-Products, Multiflex, Oceanic, Philippi, Procar, Rutland, Side-Power, Shakespeare, Spectra, Sterling, Vimar, Victron Energy, Watt & Sea and several other A-brands. Your PowerPartner since 1952.
For more details Tel: +31 204369100
or visit www.asabootelectro.nl

ASA Boot Electro
UNDERWATER LIGHTS

UNDERWATER LIGHTS
This year the team launched the QTS100 thru hull model, which arguably is the last underwater light you’ll ever need and has the potential to supersede their entire lineup. The new QTS100 model, represents 30 years of experience and is the most versatile and complete underwater light ever made for the marine industry in the simplest format possible. One generic housing now accommodates every option by simply swapping out inserts. Each insert gives a variety of options; Light power outputs from 10,000 lumens up to a massive 25,000, Colour options – white, blue, dual colour and full colour change, Input powers from 12/24vDC to 110/240vAC. This makes the thru hull QTS model suitable for any pleasure boat from 40’ up to the largest 300’+ superyacht.
For more details Tel: +44 (0)1732 455753
or visit www.underwaterlights.com

Heinen & Hopman HVAC

HEINEN & HOPMAN
Heinen & Hopman knows your vessel or structure is an investment in creating a perfect way of spending your rare spare time in life. The air conditioning system has a great impact on the ambience and comfort on board. When stepping indoors, you expect to chill out in an area with the right temperature and humidity level. Furthermore, the air conditioning should be whisper quiet and, most importantly, work perfectly at all times. When an HVAC malfunction occurs, you probably want it fixed as quickly as possible. This is why Heinen & Hopman have introduced 24/7 service contracts.

The 24/7 service contracts come in three different levels of service. However, each contract guarantees 24/7 availability: the dedicated emergency service desk will be available to answer your questions, find the bugs or errors and get the systems up and running once again.
For more details Tel: +31 33 299 2500
or visit www.heinenhopman.com/service¬contracts

Boning

BÖNING
Böning Ship Electronics are not only extremely well¬suited for initial installations in new build vessels, but also refit installations to upgrade equipment on older vessels. Using state of the art technology, Böning Automationstechnologie GmbH & Co. KG located in Ganderkesee, Germany, manufactures durable, modular products. This allows ships to be outfitted in an individualised, reaction¬free manner, matched precisely to the customer‘s needs and requirements. Böning is able to offer initial outfit and retrofit solutions that can be expanded and updated when needed. Böning’s involvement in the area of super and mega yachts started in 1996 and today, their devices and systems can be found on more than 13,000 commercial ships and luxury yachts. Böning’s recipe for success include close cooperation with the

customers, which results in the production of practice¬oriented, reliable devices and systems that affect practically all areas of the ship.
For more details Tel: +49 4221 94 75 230
or visit www.boening.com